Benefits & Features:
- Class D technology with high speed digital switching provides higher effciency, less current draw & better reliability.
- Constant power over input voltage insuring the decible level is at specification with low input voltages and not overpowering the speaker at high voltages - less risk of burning up the speaker.
- Reduction in the size and weight of the amplifier and improved vibration resistance.
- 10-30 Volt (12 or 24V).
- Long-lasting, water resistant rubber membrane push buttons. Siren includes legend to label buttons.
- Handheld controller features 3 push buttons & 6 independently controlled accessory push buttons each capable of supplying 19-20 amps.
- 6 programmable push buttons for alternate action ON/OFF, momentary ON, 8 second delay with arrow & alley light control.
- Arrow control for left, right, center out & off w/ 2-red LED indicators to indicate mode.
- Alley light control for left, right, both & off w/ 2-red LED indicators to indicate mode.
- Programmable Air Horn, Manual Tone & Volume Control.
- Controller & Holster feature built-in magnets to secure controller.
- Primary operating modes are Tone, Radio, PA, Horn Override w/ a push button Manual Override available in all modes.
385 Series Handheld Remote Siren
#ETSA385HR
Replacement Parts
#PSRNMCØ2 Replacement Microphone
Siren Tones
To hear siren tone click on tone name and a new window will open, then click the Play button. Make sure your volume is turned on! To close window click on the X in the upper right corner.
Also includes Cycle Tone and cycles through as follows:
Speaker A: Wail 1, Wail 2, Yelp 1, Yelp 2, Piercer & Alert A
Speaker B: Wail 2, Yelp 1, Yelp 2, Piercer, Alert A & Wail 1
|
